€84.90
A fitting/conversion pack for the Trumpeter 1:144 SSN-21 Seawolf.
2 in stock (can be backordered)
Description
Conversion set for the 1:144 SSN-21 Seawolf by Trumpeter. This is one of the biggest fitting packs in our offer. Originally designed to work with our original WTC for the Seawolf, but can be used with almost any 50mm/2inch tube.
The set includes:
- 3 upper ribs for and easy mount of the 50mm/2″ WTC (with a hole for the bow dive planes (pushrod)
- 4 lower ribs for and easy mount of the 50mm/2″ WTC
- 2 pairs of medium magnetic pushrod connectors
- 1 pair of smaller magnetic pushrod connectors
- rudder arm (connects the upper rudder with the lower ruder)
- 3 arms for bow and stern dive planes.
- end stop for the RCshipyards WTC.
- bearings guide for a bearing allowing of an instalment of a 3mm shaft.
- stern rib – guide for the pushrods (also adds stiffness for the hull)
- 2x bow (front) dive planes
- 2x aft (back) dive planes designed with a joint
- 1x upper rudder
- 1x lower rudder
Rudders and dive planes for the conversion of the 1:144 Trumpeter Seawolf.
The planes and rudders which come with the Trumpeter Seawolf model are a little to small if you want decent manoeuvrability in your RC model. This set deals with that problem as the Rudders and Dive planes are slightly bigger yet in a identical shape and they fit the surface of the plastic hull nicely.
In addition the stern (back) dive planes have been designed with a little joint like in the original full size vessel. The Trumpeter dive planes don’t have this feature as they have been simplified.
Rudders and Dive planes made by RCshipyard.com (white) compared to the ones supplied by the Trumpeter (grey):
This is a fitting KIT only. You still need the model and WTC for it. You can get a WTC for self assembly HERE.
